Savin 3699 Operating Instructions Manual page 61

Getting Started
to match the new paper size.
1
Note
The front fence might be fixed
by screw.
F
Make sure that the front fence is
aligned with the size line on the
base of the paper tray.
G
Remove the two green screws on
the rear fence as shown.
K
While squeezing in the sides of
40
H
While holding in the green re-
lease laver, align the rear fence to
the new paper size.
I
Check that the rear fence is set in
the correct position.
Make sure that the holes in the
base of the paper tray are properly
aligned with the holes in the rear
fence.
J
Fix the rear fence with the two
screws you removed in step G.