Redialing Numbers - Savin 3699 Operating Instructions Manual

C
Press the User Function key with
the Group Dial function stored in
it.
D
Enter the two-digit code (01 to 09)
of the Group number with the
number keys.
The Group number is shown on
the display. If the Group name is
programmed, the name is also
shown on the display.
Note
If you make a mistake, press the
{Clear} key or {Stop} key and
try again.
If you wish to dial another des-
tination, press [Add] and dial an-
other fax number.
E
Press the {Start} key.
To specify Group stored in a Quick Dial
Preparation
You need to register Groups and
assign the Group to a Quick Dial
key beforehand.
ing Groups"
A
Make sure the Memory Transmis-
sion indicator is lit.
P.185 "Register-
If it is not, press the {Transmission
Mode} key.
B
See your document and select any
scan settings you require.
C
Press the Quick Dial key in which
the Group is programed.
The Group number is shown on
the display. If the Group name is
programmed, the name is also
shown on the display.
Note
If you make a mistake, press the
{Stop} key or {Clear} key and
start again.
If you wish to dial another des-
tination, press [Add] and dial an-
other fax number.
D
Press the {Start} key.

Redialing Numbers

The machine memorizes the last 10
destinations that have been dialed. If
you wish to send a message to a des-
tination which you faxed to recently,
the Redial feature saves you finding
and entering the number again.
Dialing
2
77