Paper Size And Scanned Area - Savin 3699 Operating Instructions Manual

Note
To avoid damage to important document or documents through mishaps,
such as paper jams, we recommend that you set copies of such documents.
Documents unsuitable for the Document Bypass Tray
Setting any of the following types of document in the document bypass tray
could cause a paper jam and/or damage to documents:
• Documents of sizes other than those specified in the previous table
• Perforated or torn documents
• Curled, folded, or creased documents
• Pasted documents
• Documents with any kind of coating , such as art paper, aluminum foil, car-
bon paper, or conductive paper
• Documents with indexes, tags, or other projecting parts
• Thin and soft documents
• Sticky documents such as translucent paper

Paper Size and Scanned Area

3mm(0.12")
4mm
148
(0.16")
304
mm Feed direction
5.83"
11.97"
Document Length
105 1,200mm(4.13" 47.24")
Note
Even if the document is correctly in the Auto Document Feeder (ADF), the
shaded areas shown in the above illustration can not be guaranteed to be
scanned.
If the receiver uses paper narrower than the document, the image will be re-
duced to fit the paper width.
The machine detects paper sizes in the following ways.
• When you set a document in the Auto Document Feeder (ADF), a docu-
ment wider than about 9.53" is scanned as LT/LG size wide. A document
wider than about 10.79" is scanned as DLT size. Documents narrower than
5mm
(0.2")
GFGYOM0N
P.81 "Auto Reduction"
Acceptable Types Of Documents
1
33