Savin 3699 Operating Instructions Manual page 44

The CSI (Called Station Identifica-
tion) is passed to the other party
when you send or receive a fax.
When the CSI is received, it is
shown on the display or printed on
reports on the receiver's or send-
er's machine. The CSI works even
if the receiver or sender uses a dif-
ferent make machine. The CSI can
be up to 20 characters long and
contain a plus sign (+), numbers
and spaces. Register your country
code, area code (minus the leading
zero) and your fax number in that
order.
• PSTN Line Type
Select whether the connected line
uses tone or pulse dialing.
• PSTN Access Number
Use this setting to save having to
enter a pause after the PSTN Ac-
cess Number when dialing. For ex-
ample, if you register "0" as the
PSTN Access Number, a pause
will be inserted automatically after
the "0" when dialing.
Note
The CSI feature is not available in
some countries.
A
Make sure that the machine is in
standby mode.
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the {User Tools} key.
C
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {#} key.
The "Fax Features" menu appears.
D
Enter the code for "System Set-
tings" with the number keys.
E
Enter the code for "G3-1 Analog
Line" using the number keys.
F
Enter the code for "PSTN Line
Type" using the number keys.
Setup
1
23