Sending A Fax Using A Program - Savin 3699 Operating Instructions Manual

Sending a Fax Using a Program

If you store a combination of settings
by registering a series of key presses
in a Program, you can have these set-
tings applied to a transmission by just
pressing a Quick Dial or entering a
Speed Dial code.
Preparation
You must store the program in a
Quick Dial or Speed Dial before-
hand. P.199 "Storing Keystroke
Programs"
Limitation
Keystroke Programs can only be
stored in Speed Dials when the op-
tional Function Upgrade Card is
installed.
A
Make sure the Memory Transmis-
sion indicator is lit.
B
Set your document.
C
Do one of the following:
Sending a Fax Using a Program
To Specify a Program Stored in a
Quick Dial
A Press a Quick Dial key with
the program stored in it.
To Specify a Program Stored in a
Speed Dial
A Press the {Speed Dial} key.
B Enter the code of the Speed
Dial with the program stored
in it.
2
79