Savin 3699 Operating Instructions Manual page 68

A
Make sure that the Memory
Transmission indicator is lit.
If it is not lit, press the {Transmis-
sion Mode} key.
B
Set your document.
Note
The document can be placed at
any time up until you press the
{Start} key.
Reference
P.35 "How to Set a Document"
C
Select any scan settings you re-
quire.
Reference
P.62 "Scan Settings"
D
Dial the destination number. If
you wish to send the same mes-
sage to more than one destina-
tion, press [Add] and dial another
destination. Repeat this step for
all destinations.
Note
If you make a mistake, press the
{Clear} key or {Stop} key and
try again. The {Clear} key de-
letes one character at a time, and
the {Stop} key deletes the whole
line.
When dialing with the number
keys or using Chain Dial(
P.73), you can select the line
After transmission the machine
type (G3 or G4) before pressing
[Add] in step D.
If you do not set a document
within 1 minute of entering a
destination fax number, the
transmission is canceled.
If the "No Documents, No Dial"
function is turned on, you can-
not dial before setting your doc-
ument. P.81 "No Document,
No Dial"
Reference
P.67 "Dialing"
P.65 "Selecting the Line"
E
Press the {Start} key.
The machine starts scanning the
document.
The machine connects to the desti-
nation. The name or fax number
which is programmed as the RTI or
CSI in the other party's fax ma-
chine is shown on the display.
Reference
P.21 "Registering your RTI and
TTI"
Memory Transmission
47
2