Dialing With Speed Dials - Savin 3699 Operating Instructions Manual

Sending a Fax Message
Flip the Quick Dial plate over to
access Quick Dial keys 01-32 or 33-
64.
You can have the label stored with
a Quick Dial printed on the first
page received at the other end.
P.182 "Label Insertion"
A
2
Set your document and select any
scan settings you require.
B
Press the Quick Dial key in which
the destination's number is pro-
grammed.
If the destination's name has been
stored, the name is shown on the
display. Otherwise, the fax num-
ber is shown.
Note
If you make a mistake, press the
{Clear} key or {Stop} key and
try again. The {Clear} key de-
letes one character at a time, and
the {Stop} key deletes the whole
line.
If you wish to dial another des-
tination, press [Add] and dial an-
other fax number.
C
Press the {Start} key.
74

Dialing with Speed Dials

If you store a number in a Speed Dial,
when you want to dial it, just press
the{Speed Dial} key and enter a 2 or 3
digit code. P.195 "Registering Speed
Dials"
Note
To check the contents of all Speed
Dials, print the Speed Dial list.
As standard, you can use codes 00-
99 for Speed Dials. If the optional
Function Upgrade Card is in-
stalled, codes 000 to 999 become
available.
If a search letter is registered with
a Speed Dial, you can find this
number quickly using the Tele-
phone Directory feature.
"Telephone Directory"
You can have the label stored with
a Speed Dial printed on the first
page received at the other end.
P.197 "Turning Label Insertion on"
A
Place your document and select
any scan settings you require.
B
Press the {Speed Dial} key.
P.75