Transmission Result Report - Savin 3699 Operating Instructions Manual

Sending a Fax Message
If you are dialing with the num-
ber keys or Chain Dial (
you can select the line to use (G3
or G4).
Reference
P.67 "Dialing"
P.65 "Selecting the Line"
2
E
Press the {Start} key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
RTI or CSI in the machine of the
other party is shown on the dis-
play. When connected, the ma-
chine
document.
Reference
P.21 "Registering your RTI and
TTI"
After transmission the machine
will return to standby mode.
56
starts scanning
If the connection could not be made
P.73),
A
If it was not possible to make a
connection with the number you
dialed (e.g. the line was busy or
there is a line problem), the fol-
lowing display will appear:
Redial and try and send the
message by Memory
Transmission
A Press [Mem Tx].
To have the machine redial and
try and send the message by
Memory Transmission. All doc-
uments will be scanned into
memory then redialing will be-
gin.
To cancel this transmission
the
A Press [Cancel].
The machine returns to the
standby mode.
Redialing with Immediate
Transmission
A Press the {Pause/Redial} key.
B Press the {Start} key.

Transmission Result Report

If you turn this report on, a report will
be printed after every Immediate
Transmission so you have a record of
whether the transmission was suc-
cessful or not.