Savin 3699 Operating Instructions Manual page 81

Sending a Fax Message
When only connecting to an ISDN
line, the On Hook Dial feature be-
comes available for ISDN.
The following example describes how
to use this feature to connect to a fax
information service.
Limitation
2
You cannot use the optional hand-
set or an external telephone with
this function.
A
Press the {On Hook Dial} key.
B
Dial the fax number.
Limitation
Do not pause for more than 5
seconds between dialing digits.
If more than 5 seconds passes,
transmission will start automat-
ically.
Note
If you make a mistake, press the
{On Hook Dial} key or the {Clear
Modes/Energy Saver} key and
perform the operation again.
You can also enter the sub-ad-
dress and UUI. The correct in-
put sequence is as follows:"Fax
number" "/" Subaddress" "•"
"UUI"
60
C
Press [Dialing].
Note
Transmission will begin auto-
matically 5 seconds after enter-
ing the fax number.
D
Follow the instructions provided
by the other party.
E
When you hear a message such as
"Please press the start button",
press the {Start} key.
After a while, reception will begin.
When reception has finished, the
machine will return to standby
mode.
Note
If you wish to cancel reception
while it is in progress, press the
{Stop} key.