How To Select The Line - Savin 3699 Operating Instructions Manual

Sending a Fax Message
G3 Line Selection
G4 communication always uses IS-
DN, but G3 communication can
use either PSTN or ISDN. There-
fore, when connected to both
PSTN and ISDN and selecting G3,
you can choose which line to use.
2
Note
When using G3 with ISDN, you
can use the sub-address and
UUI.
Auto Discriminate
This function is for when G4 is se-
lected. The machine first dials us-
ing G4, but if the destination is
PSTN, it switches automatically to
G3.
Limitation
This function requires the op-
tional G4 Unit.
Note
When the destination G3 uses
TA (Terminal Identification) or
is attached to a PABX, and con-
nected to ISDN, it is detected as
G4 and the machine does not
switch to G3.
When you have stored the Line Select
function in a User Function key
When the optional G3 Unit or op-
tional G4 Unit is installed, you can
store the Line Select function in
one of the User Function keys
({F1}-{F5}).
When sending a fax, pressing the
User Function key enables you to
select the line.
66

How to Select the Line

Preparation
Store the Line Select function in a
User Function key ({F1}-{F5}).
P.211 "Assigning User Function
Keys"
A
Make sure that the G3 indicator is
lit.
B
Press the User Function key
({F1}-{F5}) with the Line Select
function stored in it.
C
Press the 01 keys to select the
line.
D
Press [OK].