Savin 3699 Operating Instructions Manual page 91

Sending a Fax Message
B
Dial the destination fax number
using the number keys.
C
2
Press the User Function key as-
signed with the Dial Options fea-
ture.
D
Enter the code for "SUB" with the
number keys.
E
Enter the SUB code with the num-
ber keys, then press [OK].
When a password (SID) is
necessary
A Enter the code for "SID" with
the number keys.
70
B Enter the SID code then press
[OK].
F
Press [OK].
G
Press the {Start} key.
Note
If you use Immediate Transmis-
sion and the destination fax ma-
chine does not support the
SUB/SID feature, a message
will appear on the display to in-
form you of this. In this case,
press [OK] to cancel the trans-
mission.
SEP Code Polling Transmission
Normally you can only use Polling
Transmission/Reception between fax
machines of the same make that have
the Polling Transmission/Reception
feature. However, if the other ma-
chine supports a similar feature
called SEP/PWD, you can send fax or
receive messages using this polling
method instead.