On-Hook Dial; Using On Hook Dial With Isdn - Savin 3699 Operating Instructions Manual

On-Hook Dial

This is just like using a connected op-
tional handset or external telephone,
except you do not have to pick up the
handset before dialing. Just press the
{On Hook Dial} key and dial the num-
ber. If you hear a voice, you can pick
up the external telephone and speak
with the other party.
Limitation
This feature is not available in
some countries.
You cannot use this feature with
the optional G3 unit.
Note
You can dial with the number
keys, Quick Dials or Speed Dials.
Reference
P.231 "Monitor Volume"
A
Set your document and select any
scan settings you require.
Reference
P.35 "How to Set a Document"
P.62 "Scan Settings"
B
Press the {On Hook Dial} key.
You will hear a low tone from the
internal speaker. If you wish to
cancel this operation, press the {On
Hook Dial} key again.
C
Dial.
The machine dials each digit as
you enter it. If you make a mistake,
press the {Stop} key, {On Hook Dial}
or {Clear Modes/Energy Saver} key
and return to step B.
D
When a connection is made to an-
other fax machine (you will hear a
high-pitched tone), press the
{Start} key.
• If you hear a voice, pick up the
external handset before you
press the {Start} key and notify
the destination that you want to
send a fax message (ask them to
switch to Fax mode).
• After transmission the machine
will return to standby mode.
Note
If you wish to cancel transmis-
sion while it is in progress, press
the {Stop} key then remove the
document.

Using On Hook Dial with ISDN

This feature requires the optional G4
Unit.
On-Hook Dial
2
59