Displaying The System Configuration - 3Com LANPLEX 6000 User Manual

4
Displaying
the System
Configuration
Top-Level Menu
system
display
ethernet
softwareUpdate
fddi
baseline
tokenring
serialPort
bridge
password
ip
name
snmp
time
analyzer
screenHeight
script
consoleLock
logout
panelLock
ctlKeys
nvData
reboot
A
DMINISTERING
E
NVIRONMENT
This chapter focuses on the administration of your LANplex system
environment, which involves:
Displaying the current system configuration
Setting system passwords
Setting the system name
Changing the date and time
Rebooting the system
The system configuration display provides software and hardware revisions,
module status information, and warning messages for certain system
conditions.
To display the configuration of a LANplex system, enter the following
command from the top level of the Administration Console:
system display
See the following example of a LANplex 6004 display:
LANplex 6004 (rev 0.2) - System ID 003000
Software version 4.1.0 - Built 04/05/95 03:10:27 PM
Slot Status
1 On-line
2 On-line
3 On-line
4 On-line
Y
OUR
Contents
LANplex Management Module - Single Mac
Ethernet Switching Module (rev. 1.3)
Ethernet/FDDI Switching Module (rev. 0
Ethernet Switching Module (rev. 2.8)
S
YSTEM