3Com LANPLEX 6000 User Manual page 70

3-24 C 3: C
HAPTER ONFIGURING
M A
ANAGEMENT CCESS
The display of the SNMP trap reporting information for a single agent is
shown in the following example:
Trap Descriptions:
Trap #Description
1 MIB II: Coldstart
2 MIB II: Authentication Failure
3 Bridge MIB: New Root
4 Bridge MIB: Topology Change
5 LANplex Systems MIB: System Overtemperature
6 LANplex Systems MIB: Power Supply Failure
7 LANplex Systems MIB: Slot Overtemperature
8 LANplex Systems MIB: Slot Insert
9 LANplex Systems MIB: Slot Extract
10 LANplex Systems MIB: Address Threshold
12 LANplex Opt FDDI MIB: SMT Hold Condition
13 LANplex Opt FDDI MIB: SMT Peer Wrap Condition
14 LANplex Opt FDDI MIB: MAC Duplicate Address
Condition
15 LANplex Opt FDDI MIB: MAC Frame Error Condition
16 LANplex Opt FDDI MIB: MAC Not Copied Condition
17 LANplex Opt FDDI MIB: MAC Neighbor Change
18 LANplex Opt FDDI MIB: MAC Path Change
19 LANplex Opt FDDI MIB: Port LER Condition
20 LANplex Opt FDDI MIB: Port Undesired Connection
21 LANplex Opt FDDI MIB: Port EB Error Condition
22 LANplex Opt FDDI MIB: Port Path Change
Trap Destinations Configured:
Address
158.101.112.3
Proxying of remote SMT events is disabled
Trap 6: Power Supply Failure only appears in the trap list if the LANplex 6000
has a dual power supply. Trap 3: New Root, Trap 4: Topology Change, and
Trap 10: Address Threshold only appear in the trap list if the LANplex system
contains at least one ESM, EFSM, and TRSM.
T T S
O HE YSTEM
Trap Numbers Enabled
1-10, 12-21