Setting The Port Paths - 3Com LANPLEX 6000 User Manual

Setting the
Port Paths
Top-Level Menu
system
station
ethernet
display
path
fddi
lerAlarm
mac
tokenring
lerCutoff
port
bridge
label
backplane
ip
station
snmp
path
analyzer
script
logout
If you change a station assignment, then you must reboot the system for
the change to take effect.
See the following example:
Select slot(s) (2,4|all) [2,4]:
Select ports(s) (1-6|all):
Slot 2 port 1 - Enter new FDDI station number (1-3) [1]:
Slot 2 port 2- Enter new FDDI station number (1-3) [1]:
You have requested that this port be moved to a different
FDDI station. You must reboot your system for this
request to take effect.
Slot 2 port 3 - Enter new FDDI station number (1-3) [1]:
You have requested that this port be moved to a different
FDDI station. You must reboot your system for this
request to take effect.
Slot 2 port 4 - Enter new FDDI station number (1-3) [1]:
Slot 2 port 5 - Enter new FDDI station number (1-3) [1]:
Slot 2 port 6 - Enter new FDDI station number (1-3) [1]:
If you change a station assignment, then you must reboot the system for
the change to take effect.
You can configure the FDDI port paths for modules with external FDDI
ports: LMM+, FCM, and EFSM.
In the you can assign the A and B ports to either the primary or secondary
paths.
To assign ports to paths:
1 From the top level of the Administration Console, enter:
fddi port path
You are prompted for a slot related to the FDDI port.
2 Enter the slot(s).
You are prompted for a path.
3 Enter the port(s) you want to configure.
Administering FDDI Ports
2
all
9-33
2
3