Administering Fddi Ports - 3Com LANPLEX 6000 User Manual

9-28 C 9: A
HAPTER DMINISTERING
Administering
FDDI Ports
Displaying Port
Information
Top-Level Menu
system
station
ethernet
path display
fddi
mac
lerAlarm
tokenring
port lerCutoff
bridge
label
backplane
ip
station
snmp
path
analyzer
script
logout
FDDI R
ESOURCES
Within an FDDI station, the PHY and PMD entities make up a port. A port
(the PHY/PMD pair that connects to the fiber media) is located at both ends
of a physical connection and determines the characteristics of that
connection. Each FDDI port is one of four types: A, B, M, or S. You can
display port statistics and configure the following port parameters:
lerAlarm
lerCutoff
port labels
port paths
When you display FDDI port information, you receive information about
ports, including the type, path, and port label, as well as other FDDI port
statistics, such as error counters.
To view FDDI port information:
1 From the top level of the Administration Console, enter:
fddi port display
You are prompted for a slot related to the FDDI port.
2 Enter the slot(s).
You are prompted for a port.
3 Enter the port about which you want to view information.
See the following example of port information: