Token Ring Menu - 3Com LANPLEX 6000 User Manual

2-6 C 2: H
HAPTER OW TO
U A
SE THE DMINISTRATION

Token Ring Menu

From the tokenring menu, you can view information for Token Ring ports
and name Token Ring ports (see Figure 2-4). You can also enable or disable
Token Ring ports, configure the Token Ring port speed, and set the Token
Ring port mode. For example, to set the Token Ring port state, you would
enter tokenring at the top-level menu, then portState at the tokenring
menu.
Top-Level Menu tokenring menu
system
ethernet
fddi
tokenring
bridge
ip
snmp
analyzer
script
logout
Figure 2-4 Token Ring Port Hierarchy
Bridge Menu
From the bridge menu, you can view information about and configure
bridge-level parameters, including those for the Spanning Tree Protocol
(STP). You can also configure the bridge at the port level and administer
packet filters (see Figure 2-5). For example, if you wanted to set the
Spanning Tree state for a bridge port, you would enter bridge at the
top-level menu, port at the bridge menu, and stpState at the bridge menu.
C
ONSOLE
portSpeed menu
summary 4Mbs
detail 16Mbs
label ETR-16Mbs
portState
portSpeed
portMode