3Com LANPLEX 6000 User Manual page 85

Loading Software 5-5
See the following screen for an example of the software installation
prompts.
Host IP address [192.9.200.14]:192.9.200.96
Install file path name [/usr/ lp6000/lp6000 ]:
User name: ronnyk
Password:
After the software is loaded, you are notified that installation has been
completed:
Installation complete.
If the LANplex executable software image stored in EPROM is corrupted (for
example, when a power failure occurs while you are updating software),
contact 3Com Technical Support. See Appendix B: Technical Support.