Alarm Setup - Panasonic K-NL404K/G User Manual

Please highlight icon
After all the setups please click OK button, system goes back to the previous menu.

4.10.4 Alarm Setup

In the main menu, from SETTING->EVENT->ALARM, you can see alarm setup interface. See Figure
4-86.
There are four alarm types. See Figure 4-86 to Figure 4-89.
Local alarm: The alarm signal system detects from the alarm input port.

Network alarm: It is the alarm signal from the network.

IPC external alarm: It is the on-off alarm signal from the front-end device and can activate the local

NVR.
IPC offline alarm: Once you select this item, system can generate an alarm when the front-end IPC

disconnects with the local NVR. The alarm can activate record, PTZ, snap and etc. The alarm can
last until the IPC and the NVR connection resumes.
Important
If it is your first time to boot up the device, the disconnection status of the front-end

network camera will not be regarded as offline. After one successfully connection, all
the disconnection events will be regarded as IPC offline event.
When IPC offline alarm occurs, the record and snapshot function of digital channel is

null.
In the main menu, from SETTING->EVENT->ALARM, you can see alarm setup interface.
Figure 4-85
to select the corresponding alarm output.
90