Panasonic K-NL404K/G User Manual page 168

Parameter Function
Click it, the interface is shown as in Figure 5-18. Here you can add
Manual
Add
network camera manually.
You can select a channel from the dropdown list (Here only shows
disconnection channel.)
Note:
System supports manufactures such as Private, Panasonic,

Sony, Dynacolor, Samsung, AXIS, Arecont, Dahua and Onvif
standard protocol.
If you do not input IP address here. System uses default IP

192.168.0.0 and system does not connect to this IP.
Cannot add two devices at the same time. Click Save button

here, system only connect to the corresponding device of current
channel.
Select IP address or the MAC address from the dropdown list and
then input the corresponding information, click Search button to view
the results.
Click to search the initialized devices. Select an uninitialized device
Uninitialize
d
and then click the Initialize button to set the account.
Preview
Click
It is to display the device has been initialized or not. That is to say,
State
the remote device has set the initial account information or not.
means the remote device has initialized,
device has not been intialized.
to view the preview video of the remote device.
Figure 5-18
162
means the remote