Panasonic K-NL404K/G User Manual page 187

Here you can also add, modify or remove UPnP item. See Figure 5-36.
In the Windows OS, From Start->Control Panel->Add or remove programs. Click the "Add/Remove

Windows Components" and then select the "Network Services" from the Windows Components
Wizard.
Click the Details button and then check the "Internet Gateway Device Discovery and Control client"

and "UPnP User Interface". Please click OK to begin installation.
Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the NVR can auto detect it

via the "My Network Places"
5.8.2.10 SNMP
The SNMP interface is shown as in Figure 5-37.
The SNMP allows the communication between the network management work station software and the
proxy of the managed device. It is reserved for the 3
Figure 5-36
rd
party to develop.
Figure 5-37
181