Panasonic K-NL404K/G User Manual page 107

RTSP port: Default value is 554.

Important: System needs to reboot after you changed and saved any setup of the above four ports.
Please make sure the port values here do not conflict.
Figure 4-99
4.11.1.2 PPPoE
PPPoE interface is shown as in Figure 4-100.
Input "PPPoE name" and "PPPoE password" you get from your ISP (Internet service provider).
Click save button, you need to restart to activate your configuration.
After rebooting, NVR will connect to internet automatically. The IP in the PPPoE is the NVR dynamic
value. You can access this IP to visit the unit.
101