Panasonic K-NL404K/G User Manual page 71

Network input alarm: It is the alarm signal from the network.

IPC external alarm: It is the on-off alarm signal from the front-end device and can activate the

local NVR.
IPC offline alarm: Once you select this item, system can generate an alarm when the front-end

IPC disconnects with the local NVR. The alarm can activate record, PTZ, snapshot and etc. The
alarm can last until the IPC and the NVR connection resumes.
Enable: Please you need to highlight this button to enable current function.

Type: normal open or normal close.

c) Click Save button to complete alarm setup interface.
d) From Main menu->SETTING->STORAGE->SCHEDULE, you can go to Figure 4-51.
e) Select alarm channel, period and the record type shall be alarm. Please refer to chapter 4.7.2.
f) Click Copy button to copy current setup to other channel(s).
g) Click OK button to save alarm record information.
4.7.4.2 Alarm Snapshot
a) Please refer to Step a) to step c) of chapter 4.7.3.2 to enable timing snapshot.
b) From Main menu->SETTING->STORAGE->SCHEDULE, you can go to Figure 4-51 to enable
snapshot function.
c) From Main menu->SETTING->EVENT->ALARM, you can go to Figure 4-64 to set alarm
parameter and enable snapshot function.
d) Click Save button to save alarm snapshot setup.
Figure 4-64
65