Panasonic K-NL404K/G User Manual page 106

button to confirm current reboot, or you can click Cancel button to terminate current modification.
Before the modification, you can check the MTU of the gateway; the MTU of the NVR shall be the
same as or is lower than the MTU of the gateway. In this way, you can reduce packets and enhance
network transmission efficiency.
The following MTU value is for reference only.
1500: Ethernet information packet max value and it is also the default value. It is the typical

setup when there is no PPPoE or VPN. It is the default setup of some router, switch or the
network adapter.
1492: Recommend value for PPPoE.

1468: Recommend value for DHCP.

Preferred DNS : DNS server IP address.

Alternate DNS : DNS server alternate address.

After completing all the setups please click save button, system goes back to the previous menu.
4.11.1.1 PORT
The connection setup interface is shown as in Figure 4-99.
Max connection: system support maximal 128 users. 0 means there is no connection limit.

TCP port: Default value is 37777.

UDP port: Default value is 37778.

HTTP port: Default value is 80.

HTTPS port: Default value is 443.

Figure 4-98
100