Ptz Control - Panasonic K-NL404K/G User Manual

4.6.2

PTZ Control

After completing all the setting please click Save button. Right click mouse (click "FN" Button in the
front panel or click "FN" key in the remote control). The interface is shown as in Figure 4-38.
The PTZ setup is shown as in See Figure 4-39.
Please note the commend name is gray once device does not support this function.
The PTZ operation is only valid in one-window mode.
Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern aux function, light
and wiper, rotation and etc.
Figure 4-37
Figure 4-38
46