Panasonic K-NL404K/G User Manual page 220

5.8.5.3.2 Tour
The tour interface is shown as in Figure 5-78. Here you can set tour interval, split mode, motion detect
tour and alarm tour mode.
Please refer to the following sheet for detailed information.
Parameter
Enable Tour
Interval
Window Split
Motion tour/
Alarm tour
5.8.5.4 Default
The default setup interface is shown as in Figure 5-80.
Here you can select NETWORK/EVENT/STORAGE/SYSTEM CONFIG/CAMERA. Or you can check the
All box to select all items.
To click
Warning!
After you use default function, some your customized setup may lose forever! Please think twice before
you begin the operation!
Figure 5-78
Function
Check the box here to enable tour function.
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4/8/9-window according to device channel amount.
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
button, you can restore factory default setup.
214