Upnp; Built-In Switch Setup - Panasonic K-NL404K/G User Manual

Figure 4-20
4.4.8

UPNP

Important
Do not connect the switch to the PoE port, otherwise the connection may fail!
Please connect the IPC to the PoE port of the device rear panel as an example (Figure 4-21), system can
auto connect to the network camera. Please note the following figure is for reference only.
Figure 4-21
4.4.9

Built-in Switch Setup

The built-in switch function is for product of PoE port.
From Main menu->SETTING->NETWORK->SWITCH, you can set switch IP address, subnet mask,
gateway and etc. See Figure 4-22.
36