Panasonic K-NL404K/G User Manual page 237

Questions
Alarm signal cannot been
disarmed.
Alarm function is null.
Record storage period is
not enough.
Cannot playback the
downloaded file.
Forgot local menu
operation password or
network password
There is no video. The
screen is in black.
The displayed video is not
full in the monitor.
There is no HDMI output.
The video is not fluent
when I view
multiple-channel mode
from the client-end.
Alarm setup is not correct.

Alarm output has been open manually.

Input device error or connection is not correct.

Some program versions may have this problem. Please upgrade

your system.
Alarm setup is not correct.

Alarm cable connection is not correct.

Alarm input signal is not correct.

There are two loops connect to one alarm device.

Camera quality is too low. Lens is dirty. Camera is installed against

the light. Camera aperture setup is not correct.
HDD capacity is not enough.

HDD is damaged.

There is no media player.

No DXB8.1 or higher graphic acceleration software.

There is no DivX503Bundle.exe control when you play the file

transformed to AVI via media player.
No DivX503Bundle.exe or ffdshow-2004 1012 .exe in PC.

Please contact your local service engineer or our sales person for

help. We can guide you to solve this problem.
IPC IP address is not right.

IPC port number is not right.

IPC account (user name/password) is not right.

IPC is offline.

Please cheek current resolution setup. If the current setup is
1920*1080, then you need to set the monitor resolution as 1920*1080.
Displayer is not in HDMI mode.

HDMI cable connection is not right.

The network bandwidth is not sufficient. The multiple-channel

monitor operation needs at least 100M or higher.
in
Your PC resources are not sufficient. For 16-ch remote monitor

operation, the PC shall have the following environment:
Quad Core, 2G or higher memory, independent displayer,
display card memory 256M or higher.
231
Solutions