4. Replacement and Adjustment
6. ID sensor cover [A] (
7. ID sensor board [B] (
Cleaning for ID sensors
ID sensors require a cleaning procedure every EM. Do the following steps for ID sensor cleaning.
1. K PCDU (
2. Fusing unit (
3. Image transfer belt unit (
4. Slide the ID sensor shutter [A] to the left side.
5. Clean the ID sensors keeping the ID sensor shutter to the left.
After installing a new ID sensor unit/board
Do the following adjustment after installing a new ID sensor unit/board.
240
x 4)
x 2)
p.214)
p.267)
p.230)