Writing Data To The Programmable Controller - Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual

36.6

Writing Data to the Programmable Controller

Write the set parameters and created programs to the CPU module.
[Online]  [Write to PLC]
Operating procedure
*1 When one of both systems is started up first, the window asking for writing the data to only the connected system appears.
• To operate CPU modules, write system parameters, CPU parameters (standard/safety), and program files
(standard/safety). To operate I/O modules and intelligent function modules, write module parameters or
module extension parameters.
• When new parameters have been set or the set parameters have been changed, reset the CPU module.
( MELSEC iQ-R CPU Module User's Manual (Startup))
• Use the [Select Favorites] button to register frequently used items such as system parameters, CPU
parameters, and programs. Select [Setting]  [Register Favorites Selection] from the menu on the "Online
Data Operation" window and set the items for the [Select Favorites] button.
1.
Select system parameters, CPU parameters (standard/
safety), module parameters, and program files
(standard/safety) on the "Online Data Operation"
window. When FBs are used, select the corresponding
FB/FUN files (standard/safety).
2.
Click the [Execute] button.
3.
Click the [Yes] button.
4.
When writing the data to the programmable controller is
completed, click the [Close] button.
36 PROCEDURE FOR STARTING UP A SYSTEM USING THE SIL2 PROCESS CPU
*1
36.6 Writing Data to the Programmable Controller
36
603