Module Parameters - Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual

Item
Routing Setting
SFC Setting
Redundant System Settings

Module parameters

The following are the lists of module parameters.
Ethernet function
For the module parameters relating to the Ethernet function, refer to the following.
 MELSEC iQ-R Ethernet User's Manual (Application)
CC-Link IE Field Network Basic function
The following is the list of module parameters relating to the CC-Link IE Field Network Basic function.
Item
CC-Link IEF Basic Setting
CPU module database access function
The following is the list of the module parameter related to the CPU module database access function.
Item
Application settings
Safety CPU parameters
The following is the list of safety CPU parameters.
Item
Memory/Device Setting
Program Setting
Safety Function Setting
Memory card parameters
The following is the list of memory card parameters.
Item
Boot Setting
Setting of File/Data Use or Not in Memory Card
APPX
936
Appendix 10 Parameter List
Routing Setting
SFC Program Start Mode Setting
Start Condition Setting
Output Mode at Block Stop Setting
Redundant Behavior Setting
Tracking Setting
Network Configuration Settings
Refresh Settings
Built-in Database Access Setting
Device/Label Memory Area Setting
Program Setting
FB/FUN File Setting
Safety Cycle Time
Safety I/O Hold Time
Signal Flow Memory Tracking Setting
Tracking Device/Label Setting
Safety Tracking Setting
Device/Label Memory Area Capacity Setting
Safety Device Point Quantity Setting
Safety Local Device Setting
Execute Order
Program Name
Execution Type
Refresh Group Setting
Device/File Use or not
Parameter No.
2000H
2010H
Parameter No.
3800H
3C00H
3C00H
3C00H
5000H
5001H
5001H
5A30H
Parameter No.
7A00H
7420H
Parameter No.
A0E0H
Parameter No.
5A00H
5A01H
5A05H
5A13H
5A10H, 5A13H
5A10H
5A10H
5A10H
5A12H
5A20H
5A21H