Troubleshooting - Honda 1986 GoldWing GL1200A Manual

Troubleshooting
All Liquid Crystal Displays (L.C.D.' s) remain OFF.
NOTE: Measure battery voltage before starting troubleshooting procedure.
FUSE: Inspect "meter" fuse in fuse;
relay box.
OK
Blown Replace fuse If replacement fuse blows,
repair short circuit. See wiring diagram.
Disconnect meter 20P white coupler
Check for continuity between BI/Br
terminal of meter 20P white coupler (on
harness die) and body ground.
POWER TO COUPLER: Turn ignition ON.
Measure voltage between BllBr
terminal of meter 13P white coupler
and G terminal of meter 13P black coupler.
idli
ODD
C' S
C2e~ 13P~S?c~Pler
o
Volts
Battery
Voltage
(11.5 to 13.5 V)
Continuity
• Sl/Sr wire shorted.
No
Continuity
• Faulty meter.
POWER TO FUSEJRELAY BOX:
Measure voltage between BllBr
terminal of fuse/relay box 9P black coupler
and battery negative ( -) terminal.
o
Volts
FUSEIRELAY BOX: Measure voltage
between each 01 two BI terminals of
fuseIrelay box 4P black coupler and
battery negative (-) terminal.
o
Volts
IGNITION SWITCH: Check ignition sWitch
for continuity; coupler for poor contacts.
Normal
Battery
Voltage
Battery
Voltage
Abnormal
• Open circuit between main wire
harness or fairing wire harness.
• Poor contact at right fairing coupler.
• Faulty fuse box.
• Poor contact at fuse terminals.
• Faulty ignition switch.
• Poor contact at coupler.
• Open ClfCUlt
In
Wife harness.
(cont'd)
8-3
._-----~~-----------------,---_
..
_-----_.-