Honda 1986 GoldWing GL1200A Manual page 42

Ignition
Ignition Coil
Removal
Remove the top compartment.
Remove the two socket bolts. Remove the PB sen-
sor/fuel pump shut-off sensor together.
Remove the air cleaner case assembly.
Remove the mounting bolts. Remove both spark units.
Remove the two bolts and the throttle cable guide. Pull
the Ignition coli toward the air cleaner.
Remove the Ignition coil screws and disconnect the ter-
minal wires. Remove the ignition coil.
NOTE: When installing the coils, the BIJW and Y IBu wires
go to the left coil (1-2). The BI/W and BulY wires go to
the right coil (3-4). Coil polarity has no effect on pertor-
mance.
Inspection
See the base manual for Ignition coil Inspection.
7-6