Honda 1986 GoldWing GL1200A Manual page 134

Auto Leveling Rear Suspension
Air Distributor
(cont'd) - - - - - - - - - - - - - - - - - - - - - -
Disassembly
Remove the pressure sensor from the distributor.
Remove the front and rear suspension solenoid valves.
Relnove the relief solenoid valve and air control needle.
NOTE: Remove the air control needle from the relief port
so you do not lose it.
Check the rubber seat at the end of each valve rod.
Replace damaged or deteriorated seats.
Remove the pressure relief valve and air valve.
AIR DISTRIBUTOR
RELIEF
SOLENIOD VALVE
(~__
RUBBER SEAT
~
CONTROL NEEDLE
Check the O-nngs for damage or deterioration.
Check that the air valve moves freely.
Disassemble the pressure relief valve.
Check the O-rings for damage or deterioration.
Check the air passages for obstructions.
Blow open all passages in the valve.
Blow open all passages In the distributor.
12·20
O-RINGS
AIR
PASSAGE
-.