WIRING: Check W/Bu and YIW wires for
continuity between fuel level sensor and
ETC
1
7P couplers. Ohmeter should
indicate continuity between same color.
and no continuity between different colors
or body ground.
_.
ABNORMAL INDICATIONS
Four bars " - -
-
-" flashing at
display in CTY and RANGE functions.
Incorrect
•
Open or short circuit in wire harness.
Correct
......- - - - . . . . Faulty ETC unit.
Below
5
Liters
FUEL LEVEL: Check amount of fuel in fuel
(1.3 gal)
Fill tank with more than 5 liters (1 .3 gal)
tank.
with ignition switch OFF. Recheck display
with ignition switch ON.
More than 5 Liters (1.3 gal)
t
Abnormal
Normal
COUPLER: Check fuel level sensor
•
Fuel level was too
coupler for poor contact. Then check fuel
Abnormal
low.
•
Poor contact at
level sensor (see page 18·24 In base
coupler.
manual).
•
Faulty fuel level
sensor.
Normal
(cont'd)
11-9