D From page 13-5.
[;
.-
From page 13-5.
POWER TO RELAY: Measure voltage
between relay socket terminals (2) and (3).
Battery voltage should appear with ignition
and cruise set switch ON. (See previous
page).
...
,~.
ONE-WA Y VALVE: Check vacuum one-
way valve (see page 13- 15).
Abnormal
Battery
Voltage
•
Poor contact at
relay terminals.
•
Faulty one-way valve.
o
Volts
•
Open circuit in
wire harness.
•
Poor contact
at harness
coupler.
_.
.-
Normal
CLUTCH SWITCH: With ignition/cruise
switch ON. measure voltage between GfBu
( +)
and G (-) terminals of ECU coupler.
Battery voltage should appear when clutch
lever
IS
pulled In.
Battery
Voltage
GEAR INDICATOR: Is indication of gear
position indicator normal?
Normal
GEARSHIFT SENSOR/WIRING:
Disconnect cruise control unit coupler and
check for continuity between R/W and G
(- J terminals. There should be continuity
only when the transmission
IS
in 4th gear.
Check for continuity between G/O and G
( -) terminal. There should be continuity
only when transmission is in 00.
Normal
SWITCHES: Check cruise and resume
switches (See page 13-10)
Normal
F
o
Volts
Abnormal
Abnormal
Abnormal
Icont'd)
•
Faulty clutch switch or open circuit
in wire harness.
•
Faulty gearshift sensor
•
Short or open circuit in wire harness.
•
Poor contact at gearshift sensor
coupler.
•
Open circuit or short in wire between
gearshift sensor and ECU coupler.
•
Poor contact at coupler
•
Faulty right handlebar switch.
•
Poor contact at switch coupler.
•
Open circuit in wire harness.
13-7