Honda 1986 GoldWing GL1200A Manual page 113

Remove the control knobs only if replacing the audio con-
trols.
Remove the six top screws and unplug the controller
coupler from the top printed board.
Remove the top printed board from the fader coupler by
removing the two screws.
NOTE' Be careful not to damage the taped harness bet-
ween printed boards during disassembly Do not remove
the base printed board.
Disconnect the black LCD indicator coupler from the
printed board.
Release the LCD Indicator from the case by removing the
seven self-tapping screws.
Remove the screws, radio controller and fader
Remove the screws which secure the printed boards.
Remove the water shield and buttons from the case.
NOTE; Record the button colors and note the location of
paper insulators as they are removed so they can be
remstalled in their original locations.
LCD INDICATOR BOARD
11-13