Honda 1986 GoldWing GL1200A Manual page 36

Brakes
Front Master Cylinder - - - - - - - - - - - - - - - - - - -
Removal/Disassembly
Remove and disassemble according to the base manual
procedures.
Remove the brake light/cruise cancel switch from the
master cylinder by loosening the screw
SCREW
-----
Installation
Align the gap between the holder and the master cylinder
with the arrow on the handlebar.
Install the brake light/crUise cancel switch by aligning the
switch pin with the master cylinder hole.
Tighten the screw securely.
6·2