Honda 1986 GoldWing GL1200A Manual page 44

Ignition
Spark Unit
(cont'd) - - - - - - - - - - - - - - - - - - - - - - -
RemoyaUlnstallatlon
Remove the top compartment, air cleaner, and air cleaner
case.
Remove the spark unit coupler.
Remove the bolt and spark unit.
NOTE: The No. 1-2 cylinder spark unit 4P coupler is red.
The No. 3-4 cylincler coupler is black.
Install the spark units in the reverse order of removal.
-' .
Spark Unit Resister
Inspection
Disconnect the coupler and measure resistance between
the white and black wire terminals.
Resistance: 2.9- 3.2 ohms
If resistance is outside lhese limits, install a new resister.
7-8