Honda 1986 GoldWing GL1200A Manual page 152

.-
Cruise Valve
Relay~~~~~~~~~~~~~~~~~~~~
Inspection
Remove the cruise valve relay from the fuse/relay box.
(Third relay from the left.)
Check for no continuity between terminals # 1 and #2. If
there is continuity, install a new relay.
Apply battery voltage across terminals #3 and #4 and
check for continuity between terminals #1 and #2. If
there is no continUity. Install a new relay.
Cruise Actuator - - - - - - - - - - - - - - - - - - - - - -
Inspection
Remove the top compartment.
Disconnect the vacuum hose from the actuator
I
and con-
nect a vacuum pump to the actuator. Apply vacuum.
If vacuum does not remain steady, install a new actuator.
If the throttle gnp does not rotate with vacuum applied,
check the following:
• Throttle Operation
• Junction box (operation of drum and lever)
.. Actuator cable
.. Throttle cables
(cant' d)
13-13