11N Wireless Broadband Router User Guide
wired networks are wirelessly connected.
Repeater Mode: In this mode, you must add the
MAC address of the connected device into the AP
MAC address table either manually or by scanning
to enlarge and extend the wireless radio coverage.
Encrypt Type: Select one from WEP, TKIP, AES for
security here.
Pass phrase: Enter the encrypted key for wireless
devices.
AP MAC: Input the MAC address of another
(opposing) wireless router you want to connect.
NOTE:
It is recommended that two wireless routers keep
the
same
settings. Apply the settings and reboot the Router
to activate it.
6.6 Wireless Access Control
Wireless access control is actually based on the MAC
address management to allow or block specific clients to
access the wireless network.
bandwidth,
channel,
38
and
security