Guest Network; Overview - Tenda AC1200 User Manual

6.2

Guest network

6.2.1

Overview

In this module, you are able to enable/disable the Guest Network function and change guest
network's WiFi name and password.
A guest network can be set up with a shared bandwidth limit for visitors to access the internet, and
isolated from the main network. It protects the security and ensures the bandwidth of your main
network.
To access the configuration page, click Wireless Settings and move to Guest Network module. By
default, the Guest Network function is disabled. The following figure shows the interface when the
function is enabled.
Parameter description
Parameter Description
Guest Network Used to enable the Guest Network function. By default, this function is disabled.
It specifies the WiFi name of the router's guest network. By default, Tenda_VIP is for 2.4
GHz WiFi network and Tenda_VIP_5G for 5 GHz WiFi network.
2.4 GHz/ 5 GHz
WiFi Name
You can change the SSIDs if required. To distinguish the guest network from the main
network, you are recommended not to set the same name for these four networks.
Guest Network It specifies the password for the router's two guest networks. Please set the passwords
Password according to your requirements.
It specifies the validity of the guest networks. The Guest Network function will be disabled
Validity
automatically out of the specified time. Please set the validity as needed.
Shared
It allows you to specify the maximum download speed for all devices connected to the
Bandwidth for
guest networks. By default, the bandwidth is not limited. You can set it as needed.
Guests
36