W3002R
Wireless N300 High Power Router
10.3 Backup/Restore
This section allows you to backup the router settings or restore the settings you
saved to the router.
Backup: Once you have configured the device the way you want it, you can save
these settings to a configuration file on your local hard drive that can later be
imported to your device in case that the device is restored to factory default
settings. To do so, click the "Backup" button and specify a directory to save
settings on your local hardware.
Restore: Click the "Browse" button to locate and select a configuration file that
is saved previously to your local hard drive.
10.4 Restore to Factory Default Settings
Click the "Restore to Factory Default" button to reset Device to factory default
settings.
Factory Default Settings:
Password: There is no preset password by default.
IP Address: 192.168.0.1
Subnet mask: 255.255.255.0.
60