6. Fuel Filter Replacement
Tightening torque (Unit: N·m {kgf·m})
Mark
–
Drain plug
–
Case
Lubricant and/or sealant
Mark
–
O-ring
Special tools
Mark
Filter wrench
Parts to be tightened
Points of application
Tool name and shape
[Removal]
• Drain fuel from the case by loosening the drain plug.
• Using
WARNING
• Fuel is highly flammable. Keep it away from flames and
• Thoroughly wipe up any spilled fuel. Otherwise, it may
CAUTION
• Be careful not to damage the case.
[Installation]
• Clean the surface of the fuel filter head and case where the O-
Tightening torque
2 ± 0.5 {0.2 ± 0.05}
18 to 20 {1.8 to 2.0}
Specified lubricant and/or sealant
Part No.
MH063201
, remove the case.
sources of heat.
catch fire.
ring is to be mounted.
Engine oil
Application
Removal and installation of case
13
Remarks
–
–
Quantity
As required
13-61