Imaging Power Pcb Unit - Nikon VBA23001 Repair Manual

・Take out the two screws (#683). Take out the two screws (#683).
・Unhook the GND plate (#110). Unhook the GND plate (#110).
Screw (#683)
× 2

Imaging power PCB unit

・Take out the three screws (#683). Take out the three screws (#683).
・Remove the shield plate (#B108) and the imaging power PCB unit (#B1029). Remove the shield plate (#B108) and the imaging power PCB unit (#B1029).
Unhook
Screw (#683)×3
- D44 ･ D90 -
INC
VBA23001-R.3762 .A
GND plate (#110)
Imaging power PCB unit (#B1029)
Shield plate (#B108)