Nikon VBA23001 Repair Manual page 129

・Fit the mount GND wires (Black/Gray) in the side hook. mount GND wires (Black/Gray) in the side hook.
・Make the two solder brides on the power drive PCB (#B1002). Make the two solder brides on the power drive PCB (#B1002).
・Solder the wires (Black/Red) of the SQ motor. Solder the wires (Black/Red) of the SQ motor.
・Solder the wires (Black/Gray) of the mount GND. Solder the wires (Black/Gray) of the mount GND.
・Solder the wires (Black) of the buzzer unit. Solder the wires (Black) of the buzzer unit.
Solder bridge ×2
Wire ×2 (Black/Red) of SQ motor
Wires (Black) of buzzer unit.
- A47 ･ D90 -
INC
VBA23001-R.3762.A
Wire ×2 (Black/Gray) of mount GND