Nikon VBA23001 Repair Manual page 123

・Mount the DC/DC PCB (#B1030) by connecting its back to the connector. DC/DC PCB (#B1030) by connecting its back to the connector.
Connector
・Tighten the screw (#683). Tighten the screw (#683).
・Solder the wires (Red/Black/Green). Solder the wires (Red/Black/Green).
・Arrange the wires so as not to be placed on the protruding portions.
Wire ×3 (Red/Black/
Green)
Screw (#683)
- A41 ･ D90 -
INC
VBA23001-R.3762.A
DC/DC PCB (#B1030)