Af Driving Base - Nikon VBA23001 Repair Manual

AF driving base

・Mount the AF driving base (#B172), and tighten the two screws (#637). Mount the AF driving base (#B172), and tighten the two screws (#637).
AF driving base (#B172)
・Attach the coupling shaft (#185). Attach the coupling shaft (#185).
・Hook the spring (#195) temporarily as below. spring (#195) temporarily as below.
Spring (#195)
・Assemble the lever (#193) into the coupling shaft (#185) by fitting in the groove. lever (#193) into the coupling shaft (#185) by fitting in the groove.
・Tighten the screw (#630). Tighten the screw (#630).
Coupling shaft (#185)
Coupling shaft (#185)
Grease: LEN317A
Lever (#193)
- A10 ･ D90 -
INC
VBA23001-R.3762.A
Screw (#637) ×2
Screw (#630)