Eyepiece Mold - Nikon VBA23001 Repair Manual

4 .Mounting Front body on Rear body. .Mounting Front body on Rear body.
・Peel off the backing paper of the dust-proof tape of the rear body.
・Mount the front body on the rear body.
・Tighten the two screws (#615), the four screws (#706) and the two screws (#702) in each numeric order. Tighten the two screws (#615), the four screws (#706) and the two screws (#702) in each numeric order. .
(#706) ×4
②
③

Eyepiece mold

・Attach the sponge (#779), the eyepiece mold (#291), and the sponge (#752). Attach the sponge (#779), the eyepiece mold (#291), and the sponge (#752).
・Tighten the two screws (#615). Tighten the two screws (#615).
Sponge (#752)
①
④
①
(#702) ×2
Eyepiece mold (#291)
Sponge (#779)
- A44 ･ D90 -
②
Screw (#615) ×2
INC
VBA23001-R.3762.A
①
②
(#615) ×2