Nikon VBA23001 Repair Manual page 146

・Arrange the wires as below. Arrange the wires as below.
・Connect the connector. Connect the connector.
・Solder the five contacts of the shoe mold unit (#B317).
・Solder the wires (Brown/Yellow). Solder the wires (Brown/Yellow).
・Solder the wires (Red/Black). Solder the wires (Red/Black).
Wire ×2 (Brown/Yellow)
shoe mold unit (#B317).
Solder ×5
- A64 ･ D90 -
INC
VBA23001-R.3762.A
Wire ×2 (Red/Black)